HS 7214-20 – Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Tariff data as of T2026-2, effective Sept 1, 2026, last verified Oct 21, 2026
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. – Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling.
10-digit tariff items
- 7214-20-00-1 – Concrete reinforcing bar, of specification CSA G30.18, with a diameter of 12 mm or less: (MFN Free)
- 7214-20-00-11 – With a maximum yield point of 400MPa (MFN Free)
- 7214-20-00-12 – With a minimum yield point greater than 400MPa but not exceeding 500MPa (MFN Free)
- 7214-20-00-13 – With a minimum yield point greater than 500MPa but not exceeding 600MPa (MFN Free)
- 7214-20-00-14 – With a minimum yield point greater than 600MPa (MFN Free)
- 7214-20-00-2 – Concrete reinforcing bar, of specification CSA G30.18, with a diameter of more than 12 mm but not exceeding 39 mm: (MFN Free)
- 7214-20-00-21 – With a maximum yield point of 400MPa (MFN Free)
- 7214-20-00-22 – With a minimum yield point greater than 400MPa but not exceeding 500MPa (MFN Free)
- 7214-20-00-23 – With a minimum yield point greater than 500MPa but not exceeding 600MPa (MFN Free)
- 7214-20-00-24 – With a minimum yield point greater than 600MPa (MFN Free)
- 7214-20-00-3 – Concrete reinforcing bar, of specification CSA G30.18, with a diameter exceeding 39 mm: (MFN Free)
- 7214-20-00-31 – With a maximum yield point of 400MPa (MFN Free)
- 7214-20-00-32 – With a minimum yield point greater than 400MPa but not exceeding 500MPa (MFN Free)
- 7214-20-00-33 – With a minimum yield point greater than 500MPa but not exceeding 600MPa (MFN Free)
- 7214-20-00-34 – With a minimum yield point greater than 600MPa (MFN Free)
- 7214-20-00-90 – Other (MFN Free)